The feature of the lining of the cone crusher is actually to defend the cylinder physical body, to make sure that the cyndrical tube body system is actually not directly affected and worn by the grinding body and also the component. It can easily likewise use its own various operating surface areas to change the working state of the grinding body system to enhance the grinding day. The crushing effect of the component enhances the grinding effectiveness, improves the result, Investigate This Site and also minimizes the reduction of the liner and also the medium.
Conoid crusher liner replacement
When the lining of the conoid crusher is not worn to the magnitude that it needs to have to become substituted, the tooth plate may be reversed, or the upper and also reduced components could be turned around. When the thickness of the liner of the conoid crusher gets to 65% to 80%, or even the partial wear is warped and also cracked, it must be actually switched out. After setting up the liners, check whether their facilities are appropriate. If the center is actually wrong, collisions will develop in the course of rotation, and also the bit dimension of the product will certainly be jagged, which will cause malfunctions including heating system of the friction components in the machine.
The liner of the cone crusher utilized to utilize high manganese steel and also modified higher manganese steel, carbon metal steel and chromium directed iron. Now so as to strengthen the service life of the liner, Hysan normally utilizes manganese steel along with a manganese information of more than 13%. Under a strong influence lots, it forms setting as well as wear-resistant strength on its own surface.
Cone crusher liner-installation technique
( 1) Put solidified carbon dioxide in to the inner gap of the bushing to be mounted to decrease the chilly dimension of the bushing. A small amount of filler may be added to the bushing to help make the dry ice entirely call the bushing.
( 2) After loading the solidified carbon dioxide, wrap the bushing and the dry ice inside along with canvas to avoid frosting on the external area of the bushing.
( 3) The cooling opportunity is actually pair of hrs. The method of determining the diameter of the bushing could be made use of to calculate whether it has actually been actually adequately cooled.
( 4) If it is figured out that the bushing is completely cooled down, it must be promptly set up in to the inner opening of the frame. After being actually set up in place, the higher area of the framework bushing should be actually flush with the upper surface area of the interior opening of the framework. If there are actually troubles in the setting up method, a wood hammer may be made use of to knock the higher surface area of the bushing slowly and also uniformly up until the whole entire bushing resides in area.
( 5) After the lining remains in place, molten zinc alloy filler is actually commonly utilized to take care of the lining.